Changing the tyres of your unit is one of the most important things to consider for efficient performance and smooth journeys. However, along the way, there will be external factors that can damage them or decrease their grip and resistance. Not only that, if we take little care of our car tyres, it can affect their duration as well. Here are a few reasons as to why it is important to keep tyres of your light truck in good condition:
- Depth of the tread of a light truck
The outer rubber part that surrounds the frame or tyre shell is known as a tread and is intended to maintain contact with the ground. This important component helps the light truck to have a good grip when moving, in addition to providing better maneuverability to the truck driver.
The type of tread depends on the application of the vehicle. If the purpose of the truck is to perform in a construction or mining area, you need an all-terrain tread, which is specifically prepared for this type of work.
On the other hand, if the light truck will work on a long-distance operating track, it is recommended to use a tread known as long-distance directional. If the correct tread is not used, the performance will be inefficient and fuel consumption will increase.
The truck driver is responsible for ensuring that the tyres have a minimum depth of ‘’coking’’ according to the law and that they are in good condition to drive. It should be noted that when driving on wet roads, it is of utmost importance that the tread has adequate depth so that they do not slide on the highway (a very common accident).
It may interest you: Save fuel with good tyres
- Wheel alignment
The incorrect alignment of the tyres can cause them to wear only in the central part, preventing the sides from making contact with the road, which increases premature wear and causes rolling resistance. When the tyres are not aligned, the aerodynamics of light trucks is compromised, resulting in greater fuel consumption per kilometer.
The alignment will allow you to drive your light truck more easily because it will go in the right direction and it will be much safer. You will even save fuel costs because when wheels are well aligned, the consumption is done in an efficient way as there is less resistance.
- Tyre pressure
Before leaving the ring, light truck drivers should perform maintenance to ensure that each part of the vehicle is operating smoothly. While checking the operation of certain components(such as headlights, batteries, and brakes) is essential, remember that it is also important to check tyre pressure before making long trips.
Properly pressurized tyres help support the load, optimize fuel consumption and keep the driver safe. By correctly inspecting the pressure before the truck takes the trip, the risk of damages are minimized and potential repairs or tyre replacements are avoided in case of emergency.
- Retread your light truck
The retreading process occurs without altering the composition of the rim or their carcasses, allowing you to save a lot of money. As the price of the procedure depends directly on the tire’s diameter, the cost-benefit ratio is favorable for light truck tyres.
It should be noted that the operation of the retreaded tyres is similar to a new one, in addition to providing the same safety agreements. According to various experts, a retreaded tyre is totally safe, if the technicians comply with the specifications, parameters, and regulations established to carry out the process.
